Nitryfikacja. Pod kontrolą.

AMTAX sc:  High precision process-instrument for the determination of ammonium in water, waste water and activated sludge. Outdoor enclosure. Incl. filter probe with 5m hose. 230V AC/50 Hz power supply.

• Automatic cleaning and calibration
• Wall mountable, rail mountable and mountable on a stand
• With integrated filter probe
• Many additional versions available on request

The sample preparation is done by an integrated sample preparation probe with 5 m heated hose. The filtration probe is operating at 230V. Evaluation and operation with SC 1000 Controller. The analyser is equipped with an insulated enclosure for outdoor installation. The sample can be analysed before any degradation. The ammonium in the sample is first converted to gaseous ammonia. Only the NH3 gas passes through the gas-permeable membrane of the electrode and is detected. This method guarantees a wide measuring range and is less susceptible to cross-sensitivity methods that make use of an ion-selective electrode (ISE). in situ membrane filtration; filter modules are exchangeable.

Back to the top.

SC 1000: Local measurement of several parameters
Probe module for connecting up to 4 SC sensors, with analogue output card with 4 x 0/4-20mA OUTPUT, relay card with 4 break contacts (NC), and EU power cord for 100-240V AC power supply.

• Flexible: individually configurable
• Future-safe: always expandable
• Intuitive operation: display with touchscreen
• Many additional versions available on request

A controller system to which SC sensors can be connected and from which they can be controlled consists of a single SC 1000 display module and one or more SC 1000 probe modules. The system is configured modularly in line with customer-specific requirements and can be expanded at any time with additional measurement stations, sensors, inputs, outputs and bus interfaces.
The probe module is used to connect SC sensors to a measurement station. Several probe modules can be linked to create a SC 1000 network.

Back to the top.

RTC-N

 Nitrification control module for NH4-N- load dependend O2 regulation. 1-channel version.

• Reduced costs for aeration
• Ensured consent performance

With the Nitrification module the required O2 concentration is calculated based on NH4-N influent load and effluent concentration. Combined feed forward and feed back control increases efficiency of treatment processes as well as consent performance. Even with extreme shock loads effluent limits are met.

Back to the top.

LDO sc: The new LDO generation - even simpler, even more reliable and even more cost-effective
Immersion or flow-through probe with optical luminescence measuring method. Calibration-free & drift-free.

• Extremely reliable - 36-month warranty on probe
• The optimised temperature sensor and the new 3D factory calibration make O2 measurement even more accurate
• No electrolyte or membrane changes necessary
• Remote functions for simple and convenient data transfer via Internet and SMS

No electrolyte or membrane changes due to the optical measurement method. The new LDO probe ensures there is only a minimal amount of maintenance. The luminescence method means the measurement is unaffected by any type of interference.
Years of practical experience have shown that this method completely overcomes the disadvantages of traditional electrochemical O2 measurement methods.

Back to the top.

SOLITAX: For the lowest turbidity and the highest solids content
Stainless steel high-precision built-in process probe to determine turbidity and suspended solids. Colour independent method with dual-beam infrared/scattered light photometer.

• Color-independent measurement of solids
• No calibration
• Excellent correlation to laboratory analysis
• Proven cleaning system
• Improve overall efficiency of the plant

90° turbidity measurement according to DIN EN ISO 7027. The backscatter photoreceptor measures suspended solids accurately in accordance with DIN 37414. A single correction factor replaces time-consuming multipoint calibrations with dilution series. The measurement data is displayed and processed with the help of a controller. The sensor is for pipe use only! A welding neck and a fitting are essential for pipe installation.

Back to the top.

RTC–N obsługuje skoki amoniaku w dopływie, natychmiast regulując proces napowietrzania w celu przywrócenia do zaprogramowanego poziomu. Wartości przepływu są stabilizowane tuż po uruchomieniu systemu, w ciągu 24 godzin po instalacji.



System RTC–N do kontroli napowietrzania został opracowany z myślą o kontroli napowietrzania w oparciu o obciążenie amoniakiem w czasie rzeczywistym. Udowodniło to możliwość redukcji zużycia energii od 10 do 30% w zależności od zakładu. Jest to przykład zakładu oczyszczania, w którym jeden zbiornik napowietrzający jest kontrolowany przez moduł RTC–N, a drugi przez istniejącą nastawę rozpuszczonego tlenu na poziomie 3,0 mg/L. Zbiornik napowietrzania RTC–N używa dużo niższych stężeń DO, co przekłada się na oszczędności do 20%!


 

Die Spektralphotometer DR 3900 VIS und DR 6000 UV-VIS wurden entwickelt, um eine hervorragende Analysegenauigkeit bei einfacher Handhabung der Tests zu erreichen. Ihre Vorteile: Hohe Effizienz im Labor – mehr als 220 direkt verfügbare, vorprogrammierte Analysemethoden Sehr genaue, zuverlässige und nachvollziehbare Messungen Einfacher und transparenter Arbeitsprozess Jetzt weitere Informationen anfordern!

   
Stellen Sie sicher, dass Ihre Anlage effizient arbeitet und die Wasserqualität das ganze Jahr ohne außerplanmäßige Ausfallzeiten überwacht wird.

Für Messgeräte ist die Wartung genauso wichtig wie die Inspektion für ein Auto:  sie spart  auf Dauer nicht nur Geld, sondern garantiert einen störungsfreien Einsatz und zuverlässige Messergebnisse. Wir bieten flexible Wartungsverträge, die auf Ihre Bedürfnisse angepasst sind, sowie die Möglichkeit, die Gewährleistung auf bis zu 5 Jahre zu verlängern.

Jetzt weitere Informationen anfordern!