Alarmy:
1 x malfunctioning, 4 x user-configurable, max. 24 VDC/0.5 A, potential free contacts
Automatyczne czyszczenie:
Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Certyfikaty:
CE, ETL certified to UL and CSA safety standards, UKCA
Ciśnienie próbki:
By external overflow vessel (open to atmospheric pressure)
Czas cyklu:
No Dilution
Default: 30 min.
Continous: 28 min.
Internal Dilution
Default: 31 min.
Continous 31 min.
Demineralised water:
Internal dilution option: Rinse water & Dilution water
Earth connection:
Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
Gwarancja:
24 miesięcy
Instrument air:
Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Jakość próbki:
Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Kalibracja:
Automatic; 2-point; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Klasa ochrony:
IP44
Liczba strumieni próbki:
Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Limit detekcji:
No Dilution
0.01 - 0.25 mg/L Ni(T): 0.01 mg/L
0.02 - 0.5 mg/L Ni(T): 0.02 mg/L
Internal Dilution
0.1 - 2.5 mg/L Ni(T): 0.1 mg/L
0.2 - 5 mg/L Ni(T): 0.2 mg/L
0.5 - 12.5 mg/L Ni(T): 0.5 mg/L
Materiał:
Hinged part: Thermoform ABS, door: PMMA
Wall section: Galvanised steel, powder coated
Metoda pomiarowa:
Colorimetric
Metoda pomiaru:
Colorimetric measurement using DMG colour solution
Model:
EZ2727sc
Natężenie przepływu:
100 - 300 mL/min
Odpływ:
Atmospheric pressure, vented, min. Ø 32 mm
Parametr:
Nickel, total
Pobór mocy:
230 VAC, 50/60 Hz
Max. power consumption: 240 VA
Precyzja:
Better than 3% full scale range for standard test solutions
Przekaźniki:
5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)
Reagent Requirements:
Keep Buffer between 10 - 25 °C, all other between 10 - 30 °C
Stopień ochrony:
IP44
Temperatura otoczenia:
10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Temperatura próbki:
10 - 30 °C
Validation:
Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Waga:
Max. 35 kg
Woda chłodząca:
Flow rate approx. 5 L/h; temperature max. 30 °C; pressure max. 0.5 bar
Wyjścia:
Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
Wyjścia analogowe:
Active 4 - 20 mA max. 500 Ohm load, standard 4, max. 8 (option)
Wyjścia cyfrowe:
Profibus DP or Modbus RTU
Wymiary (wys. x szer. x głęb.):
688 mm x 460 mm x 340 mm
Zakłócenia:
Metal ions like Aluminium Al(III), Bismuth Bi(II), Cadmium Cd(II), Chromium Cr(III), Cobalt Co(II), Copper Cu(II), Iron Fe(II), Iron Fe(III), Lead Pb(II), Manganese Mn(II), Magnesium Mg(II), Mercury Hg(II), Palladium Pd(II), Platinum Pt(II), Silver Ag(I), Tin Sn(II), Zinc Zn(II). Large amounts of colour and turbidity interferes. Fats, oil, proteins, surfactants and tar.
Zakres pomiarowy:
No Dilution
0.01 - 0.25 mg/L Ni(T)
0.02 - 0.5 mg/L Ni(T)
Internal Dilution
0.1 - 2.5 mg/L Ni(T)
0.2 - 5 mg/L Ni(T)
0.5 - 12.5 mg/L Ni(T)
Zawartość opakowania:
EZ2727sc Nickel Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets and Empty Containers for Reagents with Fittings